1. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
2. This batch of PSU comes with 10 PCIe connectors.
3. All items added to cart are shipped according to the item with the latest shipping date in the cart. If you would like to receive an item earlier, please place a separate order for it.
4. Be sure to keep the original packing on hand when you get PSU, the original box should be used to return the PSU when you requesting RMA. Otherwise, it won’t be honored.
Output |
DC Voltage |
12.15V |
Rated Current |
133A |
|
Rated Current |
100A |
|
Rated Power |
1600W |
|
Rated Power |
1200W |
|
Ripple & Noise |
<1% |
|
Voltage Regulation |
<2% |
|
Source Regulation |
<1% |
|
Load Regulation |
<1% |
|
Setup, Rise Time |
<2S |
|
Power off Protection Trip Time |
>9mS |
|
Interface Type | 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors) | |
Noise Level |
<43DB |
|
Input |
Voltage Range |
100-240V AC |
Starting Voltage |
95-105V AC |
|
Frequency Range |
47-63Hz |
|
Power Factor |
>0.95 (full load) |
|
Leakage Current |
<1.5mA (220V 50Hz) |
|
Protection |
Low-voltage Input |
80-89V AC |
Output Short Circuit |
Yes |
|
Output Overcurrent |
134-185A max. |
|
Overheat Protection |
Yes |
|
Environment Conditions |
Operating Temperature |
-20°C – 50°C |
Operating Humidity |
20% – 90% relative humidity (non-condensing) |
|
Structure |
Dimensions |
220mm*108mm*62mm |
Cooling |
Fan |
Forced-air cooling |
A 12 month warranty is provided starting from the shipping date.
With the lowest electricity rates in the world and cold Canadian Tundra climate, your bitcoin miners will have the longest life possible and maximum efficiency. All mining hardware maintained and serviced by our technicians onsite.
Hosting Solutions